Creality 3D Printer Heated Bed Surface Ultra Base Glass Bed for Ender 3 3 PRO 5

Description

Store category
Sign Up Now !
You may also like
Creality 3D Printer Platform Heated Bed Surface Ultra Base Glass Bed for Ender 3
Product Description
Product Characteristics
1.Leveling: Use A4 paper to adjust to the platform and the nozzle till there is obvious hindrance, but to be able to pull.
2.This product acid and alkali resistant, high temperature resistance 400℃.
3.The first layer of the product has a hardness of 0.5H, which is easier to be scratched, but the scratching does not affect the adhesion of the models.
4.This product will change color when rubbed repeatedly with alcohol, but will not affect normal use.
5.This product will enhance the viscosity and absorb oil ability of the platform after being slightly wiped with alcohol.
6.Try to avoid repeated touches on the platform by hand to prevent serious sweat from touching the platform.
7.This product is processed with a special process and will never appear in the glass, good solution to the problem of platform unevenness.
Temperature settings for different filaments:
PLA:50-70ºC
Flexible filament: 50-70ºC
ABS:100-125ºC (110ºCis recommended)
PC:100-130ºC (120ºC is recommended)
Nelon:90-120ºC (110ºC is recommended)
PP:100-130ºC (120 ºC is recommended)
PETG: 50-70ºC
Specification:
Material:Special Glass + microporous coatings
Item size:235*235*4mm
Box size: 360*350*40mm
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PAYPAL.
Delivery details
We ship from our Local Warehouse.
We can ship your orders only to your confirmed Paypal address. Your address and full name on Paypal must match your shipping address. Please make sure payment address in PayPal is correct.
Terms of sales
About us
We want to make 3d printer more easy and it is our target.
Contact us
Please contact us first if you have any problem.
we promise you we would do our best to solve the problem.
Feedback
Product Characteristics 1.Leveling: Use A4 paper to adjust to the platform and the nozzle till there is obvious hindrance, but to be able to pull. 2.Oily Clean: Severe oil on the surface of the platform will affect adhesion,if this happened, please heat the bed to 90℃, or put the printer aways for 8 hours, but the most direct way is to wipe a little with alcohol. 3.This product acid and alkali resistant, high temperature resistance 400℃. 4.The first layer of the product has a hardness of 0.5H, which is easier to be scratched, but the scratching does not affect the adhesion of the models. 5.This product will change color when rubbed repeatedly with alcohol, but will not affect normal use.