Fluke 1734/EUS Three Phase Electrical Energy Logger, WiFi with current probes

Description

Untitled Document
Fluke 1734/EUS Three Phase Electrical Energy Logger, WiFi with current probes
Model:
1734/EUS
| Order No:
1734/EUS
Discover when and where energy in your facility is being consumed. Automatically capture and log voltage, current, power, energy and associated values. The WiFi/Bluetooth feature gives you access to share data remotely with your team via Fluke Connect® app so you can maintain safer working distances and make critical decisions in real-time. Includes 3 flexible current probes.
Brand:
Fluke
Model:
1734/EUS
Order No:
1734/EUS
Condition:
NEW
Description
Fluke 1734/EUS Three Phase Electrical Energy Logger, WiFi with current probes
Energy logging is now within your reach— discover where you're wasting energy, optimize your facility's energy use and reduce your bill. The three-phase electrical energy logger introduces a new simplicity to discovering sources of electrical energy waste. Discover when and where energy in your facility is being consumed; from the service entrance to individual circuits. The purpose of this tool is to make it feasible for a greater variety of licensed electrical professionals to setup and connect the logger, and for a facility manager to review energy usage logs without being a power quality expert. Profiling energy usage across your facility helps you identify opportunities for energy savings, and provides you with the data you need to act on them. The new Energy Analyze software package allows you to compare multiple data points over time to build a complete picture of energy usage, which is the first step to reduce the cost of your energy bill.
Features
Key measurements: voltage, current, power, power factor and associated values enable energysaving strategies to be implemented
Bright, color touch screen: perform convenient in-the-field analysis and data checks with full graphical display
Comprehensive logging: all measured values are automatically logged and can be reviewed during logging and before downloading for on the-go analysis. More than 20 separate logging sessions can be stored on the instrument
Optimized user interface: quick, guided, graphical setup ensures you're capturing the right data every time, and the intelligent verification function indicates correct connections have been made, reducing user uncertainty
Complete 'in-the-field' setup through the front panel: no need to return to the workshop for download and setup or to take a computer to the electrical panel
Fluke Connect Enabled: Connect to up to two FC modules for associated analog values and view live data wirelessly for the Fluke 1734
Wide range power: power instrument directly from the measured circuit eliminating the need to find a power outlet while allowing the instrument to be secured safely inside electrical panels
Two USB ports: one for PC connection and another for fast, simple download to standard USB thumb drives, or other USB devices.
Compact size: designed to fit in tight spaces and panels
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream
Optimized measurement accessories: flat voltage cable and thin flexible current probes ensure easy installation even in tight spaces
Battery life: four-hour operating time (backup time) per charge on lithium-ion battery
Security: safeguard against theft with a Kensington lock
Applications
Energy Studies - full range of electrical power and energy parameters
Load Studies - simple current only logging for load sizing
General Facilities Staff
Facilities Engineers
Building Managers concerned with Energy Costs
Residential/Commercial Electricians
Energy Consultants
Advanced Energy and Load Studies with connected analog data from Fluke connect modules
Included
Energy Logger
Power Supply
Voltage Test Leads
4 x Alligator Clips
3 x 12" 1500A Flexible Current Probe
Soft Case
Magnetic Probe Set
Magnetic Hanger
Magnetic Hanging Strap
Magnetic Voltage Probes
WiFi/BLE Adapter
Line Cords
Color Coding Set
Specifications
Voltage
Range
1000 V
Maximum Resolution
0.1 V
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±(0.2% + 0.01%)
i17xx-Flex 1500 12"
Range
150 A
1500 A
Maximum Resolution
0.1 A
1 A
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±(1% + 0.02%)
±(1% + 0.02%)
i17xx-flex 3000 24"
Range
300 A
3000 A
Maximum Resolution
1 A
10 A
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±(1% + 0.03%)
±(1% + 0.03%)
i17xx-flex 6000 36"
Range
600 A
6000 A
Maximum Resolution
1 A
10 A
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±(.51% + 0.03%)
±(1.5% + 0.03%)
i40s-EL Clamp
Range
4 A
40 A
Maximum Resolution
1 mA
10 mA
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±(0.7% + 0.02%)
±(0.7% + 0.02%)
Frequency
Range
42.5 to 69 Hz
Maximum Resolution
0.01 Hz
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±(0.1%)
Aux Input
Range
±10 V DC
Maximum Resolution
0.1 mV
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±(0.2% + 0.02%)
Voltage Min/Max
Range
1000 V
Maximum Resolution
0.1 V
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±(1% + 0.1%)
Current Min/Max
Range
Defined by accessory
Maximum Resolution
Defined by accessory
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±(5% + 0.2%)
THD on Voltage
Range
1000%
Maximum Resolution
0.1%
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±0.5
THD on Current
Range
1000%
Maximum Resolution
0.1%
Intrinsic Accuracy at Reference Conditions (% of Reading + % of Full Scale)
±0.5
Active Power P
Active Energy E
a
Influence Quantity
PF ≥0.99
Apparent Power S
Active Energy E
ap
Influence Quantity
0 ≤PF ≤1
Reactive Power Q
Reactive Energy E
r
Influence Quantity
0 ≤PF ≤1
Additional Uncertainty in % of Range
Influence Quantity
V
P-N
<250 V
Power Supply
Voltage Range
100 to 500 V using safety plug input when powering from the measurement circuit
100 to 240 V using standard power cord (IEC 60320 C7)
Power Consumption
Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)
Efficiency
>68.2% (in accordance with energy efficiency regulations)
Maximum No-Load Consumption
<0.3 W only when powered using IEC 60320 input
Mains Power Frequency
50/60 Hz ± 15%
Battery
Li-ion 3.7 V, 9.25 Wh, customer-replaceable
On-Battery Runtime
Four hours in standard operating mode, up to 5.5 hours in power saving mode
Charging Time
<6 hours
Data Acquisition
Resolution
16-bit synchronous sampling
Sampling Frequency
10.24 kHz at 50/60 Hz, synchronized to mains frequency
Input Signal Frequency
50/60 Hz (42.5 to 69 Hz)
Circuit Types
1-ϕ, 1-ϕ IT, split phase, 3-ϕ delta, 3-ϕ wye, 3-ϕ wye IT, 3-ϕ wye balanced, 3-ϕ Aron/Blondel (2-element delta), 3-ϕ delta open leg, currents only (load studies)
Data Storage
Internal flash memory (not user replaceable)
Memory Size
Typical 10 logging sessions of 8 weeks with 1-minute intervals and 500 events
Basic Interval
Measured Parameters
Voltage, current, aux, frequency, THD V, THD A, power, power factor, fundamental power, DPF, energy
Averaging Interval
User selectable: 1, 5, 10, 30 sec, 1, 5, 10, 15, 30 min
Averaging Time Min/Max Values
Voltage, Current: Full cycle RMS updated every half cycle Aux, Power: 200 ms
Demand Interval (Energy Meter Mode)
Measured Parameters
Energy (Wh, varh, VAh), PF, maximum demand, cost of energy
Interval
User selectable: 5, 10, 15, 20, 30 min, off
Interfaces
USB-A
File transfer via USB flash drive, firmware updates, max. supply current: 120 mA
WiFi
File transfer and remote control via direct connection or WiFi infrastructure
Bluetooth
Read auxiliary measurement data from Fluke Connect® 3000 series modules
USB-Mini
Data download device to PC
Voltage Inputs
Number of Inputs
4 (3 phases and neutral)
Maximum Input Voltage
1000 V RMS, CF 1.7
Input Impedance
10 MΩ
Bandwidth
42.5 Hz to 3.5 kHz
Scaling
1:1 and variable
Measurement Category
1000 V CAT III/600 V CAT IV
Current Inputs
Number of Inputs
3, mode selected automatically for attached sensor
Input Voltage
Clamp input: 500/50 mV rms; CF 2.8
Rogowski Coil Input
150/15 mV rms at 50 Hz
180/18 mV rms at 60 Hz
CF 4
All at nominal probe range
Range
1 to 150 A, 10 to 1500 A with thin flexible current probe i17XX-flex1500 12"
3 to 300 A, 30 to 3000 A with thin flexible current probe i17XX-flex3000 24"
6 to 600 A, 60 to 6000 A with thin flexible current probe i17XX-flex6000 36"
40 mA to 4 A, 0.4 to 40 A with 40 A clamp i40s-EL
Bandwidth
42.5 Hz to 3.5 kHz
Scaling
1:1 and variable
Auxiliary Inputs
Number of Inputs
2
Input Range
0 to ±10 V DC, 1 reading/s
Scale Factor
Format: mx + b (gain and offset) user configurable
Displayed Units
User configurable (7 characters, for example, °C, psi, or m/s)
Wireless Connection
Number of Inputs
2
Supported Modules
Fluke Connect® 3000 series
Acquisition
1 reading/s
Environmental Specifications
Operating Temperature
14 to 122°F (-10 to 50°C)
Storage Temperature
−4 to 140°F (-20 to 60°C)
With battery: −4 to 122°F (-20 to 50°C)
Operating Humidity
50 to 86°F (10 to 30°C) max. 95% RH
86 to 104°F (30 to 40°C) max. 75% RH
104 to 122°F (40 to 50°C) max. 45% RH
Operating Altitude
6561.7' (2000 m) up to 13,123.4' (4000 m) derate to 1000 V CAT II/600 V CAT III/300 V CAT IV
Storage Altitude
39,370.1' (12,000 m)
Enclosure
IP50 in accordance with EN60529
Vibration
MIL-T-28800E, Type 3, Class III, Style B
Safety
IEC 61010-1
IEC Mains Input: Overvoltage Category II, Pollution Degree 2
Voltage Terminals: Overvoltage Category IV, Pollution Degree 2
IEC 61010-2-031: CAT IV 600 V/CAT III 1000 V
Electromagnetic Compatibility (EMC)
EN 61326-1: Industrial CISPR 11: Group 1, Class A
Korea (KCC): Class A Equipment (industrial broadcasting and communication equipment)
USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
Temperature Coefficient
0.1 x accuracy specification/°C
General Specifications
Color LCD Display
4.3" (109.2 mm) active matrix TFT, 480 x 272 pixels, resistive touch panel
Dimensions
Instrument: 7.8 x 6.6 x 2.2" (19.8 x 16.7 x 5.5 cm)
Power supply: 5.1 x 5.1 x 1.8" (13 x 13 x 4.5 cm)
Weight
Instrument: 2.5 lbs (1.1 kg)
Power supply: 0.9 lb (400 g)
Terms & Conditions
Item Condition:
Unless specified otherwise all products listed are Brand New in the original factory packaging and include a full factory warranty.
Shipping:
We currently only ship to U.S. buyers. We ship items within one or two business days from payment. We do not process shipments on weekends and holidays. Local pick up is not available. We only ship to addresses verifiable by either PayPal or credit card issuing bank.
Please note that we cannot alter the address once a purchase is made. In the case of PayPal payment, we will ship orders when the payment is marked “Eligible” for PayPal Seller’s protection.
*Shipping Rates are for Continental US, Please Contact us for other US Destinations
Payment:
Currently all payments must be made directly though PayPal
Sales Tax:
We are required to charge sales tax in North Carolina
Return Policy:
If for any reason you are not 100% satisfied with a product you receive from us, you may return the regular stock product within 30 days from the time of receipt, for a full refund or exchange of the product you purchased (less any shipping costs). Within this time, products may be returned; freight prepaid and must be in their original packaging and in resalable condition.
Shipping errors, missing items or damages must be reported to us immediately (damages should be accompanied by a signed bill of lading acknowledging the damage). Items returned will be inspected for damage or misuse at which time they may be subject to restocking fees, other fees or refused, prior to the issuance of any credit.