Mastech MS6818 Wire Cable Metal Pipe Locator Detector Tester Line Tracker

Description

Mastech MS6818 Wire Cable Metal Pipe Locator Detector Tester Line Tracker
Electrical power wire cable Locator LAN short break point Detector vs FLUKE 2042
Brand New MS6818 electrical power wire cable Metal pipe Locator Tester break point Detector compared with FLUKE F2042 up to 200cm
Brand New with one year USA warranty
Application: used for maintenance and check for communication cable, electrical power cable,
construction pipe and hot project, etc. Especially suitable for finding open or short circuit for cable
or metal pipe, fuse or socket or junction box location and so on.
Tranmitter, built-in AC/DC detecting function, can show transmitting power, code, battery status,
detecting voltage value and warning signal. Receiver can scan and check the frequency automatically,
also can show those information from transmitter too.
Both transmitter and receiver have
mute function
, especially for the place need to be quiet, for example, hospital.
Features:
1. Detecting cables, electrical lines, water/gas supply pipelines buried in wall or earth;
2. Detecting interruptions and short circuit in cables and electrical lines buried in wall or earth;
3. Detecting fuses and assigning current circuits;
4. Tracing sockets and distribution sockets having accidentally been covered by plastering;
5. Detecting interruptions and short-circuits in floor heating;
6.
The transmitter is integrated with the functions of AC/DC voltmeter,
which can measure 12 to 400V AC/DC voltage on a linear basis:
AC~: 12 to 400V (50 to 60Hz)
±
2.5%
DC-: 12 to 400V
±
2.5%
7.
The screen of the transmitter can display preset transmitting power, transmitted codes,
its own battery energy, mains voltage detected, AC/DC status of mains voltage detected,
and warning symbol for mains voltage.
8.
The transmitter has the functions of self-inspection to detect its own working status and to display it on the LCD screen for user
’
s reference.
9.
The screen of the receiver can display the transmitting power of the transmitter, transmitted codes,
energy of the transmitter
’
s and its own batteries, AC voltage induced signal detected
and warning symbol for mains voltage.
10.
The sensitivity of the receiver can be adjusted either manually or automatically.
11.
The receiver can
sweep frequency automatically.
12.
Both the transmitter and the receiver can work under mute mode.
13.
The receiver is available with automatic shutdown(it is powered off automatically over 10 minutes of absence of keystroke).
14.
The receiver
’
s LCD screen is provided with backlight for application in poor light.
15.
Both the transmitter and
the receiver is prov
ided with flashlight function when working in darkness.
16.
Additional transmitters are available to extend or distinguish several signals.
17.
Compactness, durability and portability.
This listing Includes
MS6818-T transmitter unit
and
MS6818-R receiver unit (
can sell separately);
Finds for open or short cable, metal conduit in the wall / earth or under the floor;
Tracks for cable for metal conduit in the wall/ earth or under the floor;
Finds for covered fuse, safeguard, socket or junction box;
Displays power level, code, battery status, voltage of cable in transmitter & receiver;
Display voltage ranged from 12-600V DC or AC, accuracy +-2.5%;
Sensitivity of receiver adjustable;
Key tone and beep On/Off switch;
Torch light built in transmitter;
One receiver can connect two transmitters with different codes
Used for construction and maintenance of communication cable, elevtric power cable, architecture, heating project etc;
Safety as per IEC1010-1 Cat III 600V
Depth of Track: depend on meterial
Single pole application: about 0-200cm
Dual-pole application: 0-50cm
Single loop line: up to 250cm
Technical parameters of transmitter
Output Signal
125 kHz
External voltage identification range
DC 12-400V ±2.5%; AC 12-400V(50-60Hz)±2.5%
Display
LCD, with function display and column chart
External voltage's dielectric strength
Max.400V AC/DC
Overvoltage type
CAT III 300V
Pollution degree
2
Power supply
1x9V, IEC 6LR61
Power cunsumption
Min. current about 31mA
Max. current about 115mA
Fuse
F 0.5A 500V, 6.3x32mm
Range of temperature
In work, 0
℃
to 40
℃
, with max. RH of 80%
(non- condensation)
In storage, -20
℃
to 60
℃
,with max. RH of 80%
(non- condensation)
Altitude
Max.2000m
Dimensions(HxWxD)
190mmx89mmx42.5mm
Weight
Approx. 420g, including batteries
Technical parameter
s
of receiver
Depth of tracking
The depth of tracking depends on the material &
specific applications
Cable locating mode
Single pole application: about 0-2m
Dual-pole applications: about 0-0.5m
single loop line: up to 2.5m
Grid voltage identification
About 0-0.4m
Dsiplay
LCD, with function display and column chart
Power supply
6x1.5v AAA, IEC Lr03
Power consumption
Min. current: about 32mA
Max. current: about 89mA
Range of temperature
In work, 0
℃
to 40
℃
, with max. RH of 80%
(non- condensation)
In storage, -20
℃
to 60
℃
,with max. RH of 80%
(non- condensation)
Altitude
Max. 2000m
Dimensions(HxWxD)
241.5mmx78mmx38.5mm
Weight
Approx. 350g, including batteries
SPECIFICATIONS
Features:
Conformance to IEC61010-1 CAT III 600V
Display
1999 Counts
Diode Check
√
Continuity Check
√
Auto/Manual range
√
Data Hold
√
Max value Measurement
√
Back light
√
Telephone Check
Identify the state for the working telephone line: Busy, Ringing or Clear
Tone
Judge continuity of the cables or wires.
Track the cables or wires, and diagnose the break point.
NetCable Check
Test for open circuits, Shorts, miswires, reversals, split pairs and LCD display the test results.
SHIELD detection tests a cable's shield integrity.
Main unit and one remote allow one person
testing of T568A, T568B, 10Base-T.
Easy to read fault display and high speed testing.
Debug mode for detailed fault identification result.
Low Battery Indication
√
Auto Power Off
√
None Contact Voltage Detect
√
Power Supply
9V(6F22)
Dimension
186(L) x 88(W) x 55(H)mm
Weight
Appro.400g
Function:
Range
Accuracy
DC Voltage
200mV/2V/20V/200V/600V
0.7%rdg+3dgt
AC Voltage
200mV/2V/20V/200V/600V
0.8%rdg+5dgt
DC Current
200uA/2000uA/20mA/200mA
1.2%rdg+5dgt
2A/10A
2.0%rdg+5dgt
AC Current
200uA/2000uA/20mA/200mA
1.5%rdg+5dgt
2A/10A
3.0%rdg+5dgt
Resistance
200Ω/2k/20k/200k/2M/20M
1.0%rdg+3dgt
Accessories:
1) Crocodile clamps: 2pcs
2) Test leads: 2pcs
3) test probe
4) Grounding rod;
5) Portable bag;
6) English manual;
Shipping:  all orders will ship by express mail with track number from our China warehouse, it takes around 6-10 business days to arrive. The track number will e-mail to you.
eBay Cross Border Trade powered by MerchantRun GlobalLink
eBay Cross Border Trade powered by Channel Effect