RP-1226 14 way 2 9 pin 2019 &UP cable PP207234 A2829T2XO-24 Paccar Pete Kenworth

Description

This cable plugs into the RP-1226 gray 14 way connector on your 2019 and newer Peterbilt, Kenworth, Paccar product heavy truck. The 14 way connector to connect to is located near the fuse panel.
This cable is wired to be the same as the pin out of 9 pin on 2018 and newer Peterbilt, Kenworth, Paccar. That is it already has the crossover wiring so that CAN is on pins F & G and C & D
You can plug in your ELD or other device or cable that has the 8 or 9 pin round designed to plug into diagnostics port on truck.
You can also use this cable to connect your Omnitracs/Qualcomm harness part number
45-JE042-1A IVG
to your 2019 and newer Paccar truck.
This cable has same wiring as the dealer cable part number PP207234 plus it has all other circuits wired as well.
24" length
Heavy duty 20 gauge stranded wire cable
Fits accessory connector found on 2019 and newer heavy trucks such including Kenworth and Peterbilt. If your truck has the warning label shown in picture 8 above this is the connector that plugs into the accessory connector located above fuse panel or on left side of steering column behind dash cover.
On vehicles with warning label you should only use the accessory connector to power and run your telematics, ELD or other aftermarket devices that require data from J1939, CAN or J1708. This conforms with TMC RP1226
Provides the following at 9 pin;
Green pin               Function
A                             Ground
B                             +12 Volts
C                             + 500kbps CAN HI
D                             - 500kbps CAN LO
F                              + J1939/CAN HI
G                             -J1939/CAN LO
The Apex 2.8 sold here are genuine Aptiva parts - Formerly Delphi and conforms to VECU TMC RP-1226 specification
Feel free to message/contact me and we can discuss to make sure you are getting the right stuff!! I repond very quickly and never longer than 1 day.
Thanks for looking!