Set Clear Sikkens Autoclear LV Superior 5+ Catalyst 2,5 + Thinner 1

Description

Sikkens Autoclear LV 5 liters + Catalyst 2.5 lt + Thinner 1 lt
Two-component transparent with low VOC, compliant with the most recent atmospheric emissions regulations.
The combination of three clear coats, one catalyst and three thinners allows to obtain excellent results in any condition
and for any type of application.
This clear guarantees good r Two-component, high solid transparent, universal application and scratch-resistant.
Applied on Autowave, double and triple layers, it guarantees excellent relaxation and shine.
100 Autoclear LV Superior
60 Autoclear LV Superior Hardener
20 Autoclear LV Superior Reducer
Airbrush settings: 1.2-1.4 mm
Application pressure:
1.7-2.2 bar to the injector
HVLP max 0.6-0.7 bar to the hat
2 x 1 coat
2 x 1 coat
Apply a medium coat, followed, after drying, by a full coat
Between coats: 3-5 minutes at 20 ° C
Before drying: 3-5 minutes at 20 ° C
Select the Reducer based on the
application temperature
Withering is influenced by the type of oven
20 ° C
60 ° C
Autoclear LV Superior Fast
6 hours
15 minutes
Autoclear LV Superior Medium
7 hours
25 minutes
Autoclear LV Superior Medium
8 hours
35 minutes
Use suitable respiratory protection
Akzo Nobel Car Refinishes recommends the use of a pure air respirator.
Product & additives
Autoclear LV Superior Fast: 15 minutes of drying at 60 ° C
Autoclear LV Superior Medium: 25 minutes of drying at 60 ° C
Autoclear LV Superior Slow: 35 minutes of drying at 60 ° C
Catalysts
Autoclear LV Superior Hardener: for any type of repair.
Thinners
Autoclear LV Superior Reducer Fast; for touch-ups and repairs of panels below 20ºC
Autoclear LV Superior Reducer Medium; for retouching and repairing panels between 20 ° C-35 ° C
Autoclear LV Superior Reducer Slow; for large surfaces or total paints between 25 ° C-45 ° C
Accelerator
Autoclear LV Superior Accelerator; for touch-ups and repairs of panels below 30ºC
Additives
Autoclear Mat; opaque transparent that allows to obtain different gloss levels (ST 5.5.1)
The use of elasticizers (Elast-o-Actif) is not required for application on plastic parts.
Composition
Autoclear LV Superior; polyol resins
Autoclear LV Superior Hardener; polyisocyanate resins
Method of use
Suitable media
Autowave; after a drying of at least 15 minutes at 25 ° C
Mixing
100 Autoclear LV Superior - Autoclear LV Superior Fast / Medium
60 Autoclear LV Superior Hardener - Autoclear LV Superior Hardener
20 Autoclear LV Superior Reducer - Autoclear LV Superior Accelerator
Catalysis by weight
For 100 g
For 300 g
For 500 g
Per 1000 g
Autoclear LV Superior
100
300
500
1000
Autoclear LV Superior Hardener
62
186
310
620
Autoclear LV Superior Reducer
17
52
86
173
Use the measuring rod no. 31 Blue
Viscosity
15-17 seconds in din 4 cup at 20 ° C
Airbrush predispositions
Airbrush
Nozzle
Application pressure
Fall:
1.2-1.4 mm
1.7-2.2 bar to the injector
HVLP max 0.6-0.7 bar to the hat
Application & shade
Apply a first medium coat and leave to dry for 3-5 minutes at 20 ° C.
Apply a second full coat. Leave to dry for 3-5 minutes at 20 ° C before forced drying.
Withering between coats: for repairs of large surfaces, apply the minimum withering time.
Recoatable with itself at any stage. After 24 hours it is necessary to sand.
For retouching (retouching and shading of panels), see TDS S8.01.01
When sanding and polishing are required, a third coat can be applied after drying at 20 ° C.
Pot life
Autoclear LV Superior Fast 30 minutes at 20 ° C
Autoclear LV Superior Fast + Autoclear LV Superior Accelerator 30 minutes at 20 ° C
Autoclear LV Superior Medium 1 hour at 20 ° C
Autoclear LV Superior Medium + Autoclear LV Superior Accelerator 1 hour at 20 ° C
Autoclear LV Superior Slow 1½ hour at 20 ° C
Drying times
Leave to dry for at least 5 minutes at 20 ° C before bringing the car into the preheated oven at 60 ° C.
All drying times refer to the standard application and the substrate temperature.
Also take into account the time required for the cabin air and the object to reach a temperature of 60 ° C.
Product
Dust free
Dry to handle
LV Superior Fast LV Superior Accelerator
50 minutes at 20 ° C
7 minutes at 50 °
4 minutes at 60 °
3 hours at 20 ° C
25 minutes at 50 °
15 minutes at 60 °
LV Superior Medium LV Superior Accelerator
50 minutes at 20 ° C
10 minutes at 50 °
6 minutes at 60 °
3 hours at 20 ° C
20 minutes at 50 °
12 minutes at 60 °
LV Superior Fast
1 hour at 20 ° C
10 minutes at 50 °
7 minutes at 60 °
6 hours at 20 ° C
30 minutes at 50 °
15 minutes at 60 °
LV Superior Medium
1 ½ hours at 20 ° C
20 minutes at 50 °
10 minutes at 60 °
7 hours at 20 ° C
50 minutes at 50 °
20 minutes at 60 °
LV Superior Slow
2 ½ hours at 20 ° C
25 minutes at 50 °
20 minutes at 60 °
8 hours at 20 ° C
60 minutes at 50 °
35 minutes at 60 °
Deep drying:
After the drying cycle at 60 ° C, allow Autoclear LV Superior to return to room temperature to complete the drying in depth.
Infrared:
Dry to handle after about 10 minutes
Leave to dry for 5 minutes before infrared drying.
The panel must never reach a temperature of 100 ° C during drying.
For further information consult ST 7.9 Infrared drying
polishing
Dirt and small imperfections can be eliminated by polishing after the complete drying cycle at 60 ° C and return to room temperature.
Sand gently and polish.
Ready to polish: about 1 hour after cooling to room temperature.
thicknesses
Per coat: 30 - 40 μm
Following the recommended application (2 coats) 45-60 μm
Surrender
With ready-to-use mixture and dry film thickness of 1 μm ± 510 m² / liters
Cleaning of equipment
Clean the equipment immediately after use with washing solvents.
VOC
2004/42 / IIb (d) (420) 413
The limit value of the European directive for this type of ready-to-use products (category: IIB. d) is 420
g / liter. The VOC of this ready-to-use product is at most 413 g / liter.
Storage
The storage time refers to the product kept closed and at 20 ° C.
Avoid sudden changes in temperature.
For the storage of the products, consult ST S9.01.02
FOR PROFESSIONAL USE ONLY
IMPORTANT NOTE. The information contained in this sheet is not to be considered exhaustive and is based on our current technical knowledge and applicable laws: anyone who uses the product for purposes other than those specifically suggested in the technical sheet, without having previously obtained our written authorization, does so at your own risk. It is always the user's responsibility to take all the necessary measures to comply with the requirements
local laws. Always read the safety data sheet and the technical data sheet of this product, if available. All suggestions or declarations made by us regarding the product (both in this form and in another way) are correct based on our best knowledge, however the quality or the state of the support or the many factors are beyond our control external influencing the use and application of the product. Consequently, in the absence of
a specific written agreement, we do not accept any responsibility for the performance of the product or for the losses or damages deriving from the use of the same. All products and technical advice provided comply with our standard terms and conditions of sale. We recommend that you request a copy of this document and read it carefully. The information contained in this sheet is subject to periodic changes, in the light of the experience acquired and of our policy of continuous development. It is the user's responsibility to verify that this sheet is up to date before using the product.
This card mentions trademarks owned or licensed to Akzo Nobel.existence and reliable performance, as well as excellent brilliance on Autowave.
Ferraris Color is the official dealer of market leading products for the bodywork, boating and industrial paints world.
Search between epoxy, polyurethane, magnetic paint, spray gun and many other products.
CONTACT US FOR INFO AND CLARIFICATIONS
2 x 1 coat 2 x 1 coat 20 ° C 60 ° C 6 hours 15 minutes 7 hours 25 minutes 8 hours 35 minutes Catalysts Thinners Accelerator Additives Composition Method of use Suitable media Mixing For 100 g For 300 g For 500 g Per 1000 g 100 300 500 1000 62 186 310 620 17 52 86 173 Viscosity Airbrush Nozzle Fall: 1.2-1.4 mm Pot life Drying times Product Dust free Dry to handle 7 minutes at 50 ° 4 minutes at 60 ° 3 hours at 20 ° C 25 minutes at 50 ° 15 minutes at 60 ° 10 minutes at 50 ° 6 minutes at 60 ° 3 hours at 20 ° C 20 minutes at 50 ° 12 minutes at 60 ° LV Superior Fast 1 hour at 20 ° C 10 minutes at 50 ° 7 minutes at 60 ° 6 hours at 20 ° C 30 minutes at 50 ° 15 minutes at 60 ° 7 hours at 20 ° C LV Superior Slow 8 hours at 20 ° C Deep drying: Infrared: polishing thicknesses Surrender VOC Storage